Schienenräumung - BETA 4 - Hardware Kit - TO ORDER good

good This is a hardware kit for the BETA 4 version of the Schienenräumung blaster. It's meant for self-printers.

The kit contains every screw, spring, rod and piece of electronic that you need to assemble your own blaster. The only things not in there are the printed parts.

Please make sure to carefully pick your motors and whether or not you want machined flywheels.

The wheels are non-standard size, but can be printed yourself if you use Valkyries. That combination holds up pretty well. Anything faster/stronger gets dicy. They might melt off of your motor shafts, depending on what material you print them with. Do let me know how they holds up, if you chose to go that route.

---

The bill of materials:

- 2x Motors (Please pick a set)
- 1x Pair of Machined Flywheels (Made from Delrin by Wurstwerfer, if you chose to get them)
- 1x Switch (21 A)
- 1x XT60 Connector
- 1x K3/2.4mm Chain (130mm)
- 1x SR5100 One-Way Diode
- 1x 3S Voltage Alarm
- 1x JST-XH-4P 2.54mm Connector F
- 2x 12V LED Strip (15cm)
- 1x SR5100 One-Way Diode
- 1x M3 Brass Insert

- 2x Crimp Terminal 6.3mm F
- 4x Crimp Terminal 6.3mm M
- 6x Crimp Terminal 2.8mm F
- 6x Crimp Terminal 2.8mm M
- 4x Crimp T-Connector

Springs
- Compression 5.5x20mm (1)
- Extension 5.5x25.5mm (1)
- Extension 7x38mm (1)

Aluminium Rods
- 4x150mm (1)
- 4x140mm (1)
- 4x110mm (1)
- 4x50mm (1)
- 4x30mm (1)
- 4x20mm (3)
- 4x15mm (1)

Wire (0.75mm / AWG 18)
- 60cm (1)
- 20cm (2)
- 15cm (4)
- 10cm (2)

Wire (0.5mm / AWG 20)
- 15cm (4)

- 1x Thumb Screw M3x12mm

Screws (Counter-sunk, self-tapping, pointy)
- 3x12mm (52)
- 3x20mm (33)
- 3x30mm (16)
- 3x40mm (1)

- A bunch of heat shrink, for safety
- Plus some various spare parts, in case anything drops off of the table into oblivion.